MeasuringRangeinSteelPulse-EchoMode(PitFlawDetection)measuresfrom0

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：197

產品咨詢 13352927502

詳細介紹在線留言

Measuring Range in Steel

Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)

Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters)

(range depends upon probe selected)

5 year warrantyThe new CHECK-LINE TI-25DL-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

Checkline TI-25DL-MMX can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

TI-25DL-MMX incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The TI-25DL-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Ability to measure through paint and eliminate coatings
Resolution of 0.001 inch (0.01 mm)
Large, backlit LCD display retains last reading
Simple operator controls virtually eliminate training
RS-232C Serial output for downloading stored data to a printer or computer
Memory for 1000 data points in up to 10 batches
Special-purpose probes are offered for a variety of applications
Switch-selected units for inches or mm
For underwater surveying, probe cable lengths up to 50 feet are optionally
CE Certified
Includes NIST-Traceable Calibration Certificate
IP 65 Rated

Range	Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe) 0.63 to 150 millimeters (up to 500 mm if uncoated using T-102-2000 probe).To measure down to 0.025"/1.00mm, requires use of T-102-3300 Probe <="" td="">
Resolution	.001" (0.01 mm)
Display	4? - Digit, 0.5" Backlit LCD
Velocity Range	0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec
Probe	5 MHz, 0.25" Diameter (6.35 mm)
Probe Wearface	PEEK (Polyethlethylketone)
Cable	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Temp. Limits	Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Serial Output	RS-232C (8, N, 1, user-set baud rate)
Battery Type	Two AA batteries
Battery Life	200 hours
Weight	7 ounces (196 g)
Size	2.5 x 4.5 x 1.25" (64 x 114 x 32 mm)
Accessories Included	Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty	Gauge: 5 Years Probes: 90 Days

訂貨清單

The TI-25DL-MMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable, Serial to USB adapter and Operating Instruction Manual - all in a foam-fitted carrying case.

配件

TICC-M Protective Holder for Most TI Series Gauges

CF12 Coupling Fluid - 12oz

V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)

T-102-2700 1/4" diameter, 5.00 MHz, dual element, Hi-Damped transducer

T-104-9700 1/2" diameter, 3.5 MHz, dual element, Hi-Damped transducer

T-212-2001 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer

BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit

訂貨型號

TI-25DL-MMX Data Logging Through-Paint Ultrasonic Thickness Gauge Kit with T-102-2700 Probe

TI-25DL-MMX-EXT Data Logging Through-Paint Ultrasonic Thickness Gauge Kit with T-104-9700 Probe

相關型號